DREAMVISION Dreamy geek, Руководство пользователя

Страница: 10 / 32

R699831 - Dreamy Geek User Manual
WIreLeSS KeYBoard and aIr mouSe
10
3.2 Loading and replacing Batteries
a) Push the cover tab with the fingernail a little backwards and pull upwards the cover top. Slide the cover
forward to remove.
b) Push the battery body towards the spring and lift up to remove. Insert two AAA size batteries, making sure
the polarities match the + and - marks inside the battery compartment.
c) Insert the lower tab of the battery cover in the gap at the bottom of the remote control, and press the cover
until it is firmly closed.
If the remote control has to be brought closer to the projector to operate, it means that the batteries are
wearing out. When this happens, replace the batteries. Always insert the batteries according to the +
and - marks.
4.0 WIRELESS KEYBOARD AND AIR MOUSE
4.1 General View
The Wireless Keyboard and Air mouse is a standalone device working on 2.4 GHz radio-frequency. It is a
convenient alternative to the use of both a keyboard and a mouse without the need of a flat surface or table. The
USB dongle is small and discrete once connected to a free USB port.
4.2 Connecting the Wireless Keyboard and Air mouse
The Wireless Keyboard and Air mouse uses 3x AAA batteries to operate and must be connected to the Dreamy
Geek using the dedicated USB dongle.
• Open the Wireless Keyboard bottom case and put 3x AAA batteries according to the + and - marks. Take out
the USB dongle.
USB dongle
Locate and pull out the USB dongle from its slot.
• Close the bottom case of the Wireless Keyboard
• Plug the USB dongle into a free USB slot of the Dreamy Geek.
• Press any key on the Wireless Keyboard to wake it up.
4.3 Switching between Keyboard and Air mouse Functions
The wireless control pad acts like a keyboard by default, simply click on the green Android icon to switch ON the
Air mouse function. Wave the Keyboard with the blue LEDs toward the screen to operate the Air mouse.