DREAMVISION Dreamy geek II, Руководство пользователя

Страница: 23 / 28

maIntenanCe
R699854 - Dreamy Geek 2 User Manual 23
13.6 Clean Memory
Confirm to close all the running Apps and to release used memory.
13.7 Focus Figure
Confirm to display a Focus test pattern.
13.8 ScreenShot
Confirm to take a screenshot of the current screen. The picture is stored in the TF-Card (sda1/Pictures/
Screenshots/). If no TF-Card is inserted, the screenshot will fail.
13.9 Luminance Mode
Select one of the pre-configured Luminance Mode between: TextMode, MovieMode, Custom, SaveMode and
LedOff. The Custom mode gives access to the adjustment of the Light Intensity output, and R G B individual
adjustments. Additionally, the LED duty cycle may be adjust to compensate the ambiant light or wall color.
14.0 MAINTENANCE
14.1 Clean Dirt
Dirt on the Cabinet
Always use a soft cloth. In case of heavy soiling, soak a cloth in neutral detergent diluted with water, wring dry
and wipe, followed by wiping again using a dry cloth.
Pay attention to the following as the cabinet may deteriorate in condition, get damaged or paint may
come off:
-Do not wipe with a stiff cloth.
-Do not wipe with force.
- Do not wipe with thinner or benzene.
Dirt on the Lens
The lens shall be cleaned using commercial blowers or lens cleaning papers (for cleaning glasses and cameras).
Do not use fluid-type cleaning agents. The lens surface is fragile. Avoid rubbing it hard or knocking.
14.2 Unexpected Behavior
The Unit is unresponsive
In a few cases, this unit may not respond to the remote control or may display a wrong picture. Make sure that
the batteries used in the remote control have still some power in it.
If the problem persists, try to switch OFF this unit and wait at least 3 minutes before powering it ON again.
Video is playing but there is no Sound
If there is no sound coming from the internal loudspeakers, make sure that the Audio settings have been correctly
set.
a) Double check that the sound is not muted by pressing the [Mute] button on the RCU.
b) Make sure that the HDMI source is set to send audio through the HDMI input, and if you are using the RCA
Video input, make sure to have the audio cable correctly connected to this unit using the Audio L/R inputs
(white and red RCA connectors).
c) Please note that the Headphone stereo Jack 3,5mm may be used only as an audio output.