7mm
16
IMPORTANT
Once the feet have been
assembled and attached,
they should be adjusted to
ensure they do not touch
the floor, (7mm above the
floor) to allow for movement
once the mattress is placed
on the bed frame.
It is important to note that
when moving the bed that
it is not dragged into its new
position to prevent the
possibility of these feet
being twisted or angled to
one side, which could lead
to the collapse of the centre
of the bed.
To move the bed, remove
the mattress and lift the bed
into its new position to avoid
damage.
Ensure the feet are at 90 to
the floor before replacing
the mattress.
Place the fixed wood slats
onto the slat holders on
side rails "3" and "4".
Fix the slats at both ends
and the middle using screws
"I" and washers "P", tighten
with a screwdriver. total of
six screws and washers.
Option 1:
Dreams solid slats
Important Note:
Your
Bedstead comes supplied as
standard with Solid Wood
Slats, or upgrade available to
Sprung Slat System at point
of purchase at an additional
cost.
Please carefully follow the
correct assembly instructions
for the slat system that you
have purchased.
Page 10 of 12
27814400
1
2
3
4
Ix6
Px6
