3
3
1
2
Page 6 of 6
Fx1
Gx4
Hx4
Fx1
Turn the metal slat frame
falling upward and
carefully lower the slat
frame into the bed.
Ensure that the frame sits
on the guides located on
the side rails "3".
Position the slat frame so
that the holes in the
frame align with those in
the side rails "3".Secure
the frame to the side rails
"3" by threading bolt "G"
and through the holes in the
frame and the side rails "3".
Finally,tighten the bolt "G"
into the sleeve nut "H" from
the top of slat frame with
allen key "F".
SAFETY WARNINGS
THIS PRODUCT COMPLIES WITH BS EN1725
1.THE TOP SURFACE OF THE MATTRESS MUST NOT BE ABOVE THE LINE MARKED ON
THE FRAME
2.DO NOT ALLOW CHILDREN UNDER 6 YEARS OLD TO USE THE UPPER BUNK
3.ALWAYS USE THE LADDER FOR ENTERING THE UPPER BUNK
4.DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON
THE BED
5.USE A NIGHTLIGHT AS AN ADDED SAFETY PRECAUTION FOR PERSONS USING THE
UPPER BUNK
6.USE GUARDRAILS ON BOTH LONG SIDES OF THE UPPER BUNK
