© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
Installation steps
11
ENIGMA AIR ENCLOSURE Shower Enclosure manual Ver 1 Rev 4 062019
©2019 DreamLine. All Rights Reserved
Threshold must be level.
!
Fig 2
Fig 1
Outside dimensions of the installed enclosure
2-1/4”
minimum
W1
34-3/4”
W2
W1
50-3/8”
min to 54-3/8”
max
56-3/8”
min to 60-3/8”
max
44-3/8“
min to 48-3/8”
max
or
or
2-1/4” minimum
threshold required
1.
Check both of the finished walls for plumb and
the threshold for level. Confirm that the threshold
meets the
minimum threshold requirement of
2-1/4”
for this unit. Compare the overall (outside)
dimensions of the enclosure against the threshold
to ensure it will fit prior to beginning installation.
(Fig 1)
2.
Measure the
W2
dimension from the finished corner
of the opening over to the return panel threshold.
(based on the model size as shown on the
“Shower
Enclosure Plan”
Page 11)
Next, measure the
W1
dimension of
34-3/4“
out from
the wall as the width of the return panel. These will be
the outside dimensions of the installed enclosure.
Use a carpenter’s square and a straight edge as a guide
and extend this line across the primary threshold to the
opposite wall to use for reference in
Step #14
during
the installation of the U-Channel for the inline panel
glass.
(Fig 2)
W1 = 34-3/4”
W2 = between 44-3/8” min > 48-3/8” max
OR
W2= between 50-3/8” min to 54-3/8” max
OR
W2= between 56-3/8” min to 60-3/8” max
NOTE:
This model requires a minimum 2-1/4”
of flat threshold space for installation.
!
NOTE:
This model will allow for up to 1/4”
of out-of-plumb adjustment within the
u-channels for the inline panel and return
panel
