© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools Needed
Parts Needed
CREST Shower Door Manual Ver 1 Rev 2 022020
10
©2020 DreamLine® All Rights Reserved
!
After determining the handing of the installation:
Only cut from the end of the Bottom Profile (#03)
that will be installed on the door side of the opening.
The length to cut-off of the door side of the
Bottom Profile (#03)
will be
(L)
:
Finished Opening (W) (-) 1/16” = Finished Cut Length (L)
TIP
Use a metal file to
deburr the cut end
L
L
L
OR
!
The
Bottom Profile (#06)
can be cut from either end depending on the installation.
Do Not cut off more than 2” from the Bottom Profile as this would remove
allowance for the Panel and Door Glass installation.
!
Do Not cut off more than 2”!
Fig 3a
Fig 3b
06
x1
*In this example, the
Bottom Profile (#06)
is shown for a right-hand door installation.
*Door End
*Panel End
cut from the door end only
3