Dreamline BUTTERFLY+ENCLOSURE Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 16

Dreamline BUTTERFLY+ENCLOSURE Скачать руководство пользователя страница 2

“BUTTERFLY” Enclosure Rev.1 Ver.3

2

Preparation

1.

After opening all boxes and packages, read this introduction carefully. Check that all of the needed
parts are included in the package by marking all the components on the “Detailed Diagram of
Shower Door Components”. Examine boxes and packages for shipping damage. If the unit has

been damaged, has a finishing defect, or is missing parts, please contact our customer support
department within 5 business days of the delivery date. Please note that

DreamLine

TM

will not

replace any damaged products or missing parts free of charge after 5 business days or if the

product has been installed.

Feel free to contact DreamLine

TM

if you have any questions.

2.

Please note that you should consult your local building codes with questions on installation
compliance standards. Building and plumbing codes may vary by location, and DreamLine is

not responsible for code compliance standards for your project and will not accept any
returns.

3.

If this unit is going to be installed in a new construction, please, install all of the required plumbing
and drainage before installing the shower.

Use a competent and licensed (if required by local

code) plumber for all plumbing installation period.

4.

Prior to installation, please ensure that the installation surface is level and solid and will be able to
support the total weight of the unit. Also, make sure that the walls are plumb. Depending on the
type of unit you are installing, some adjustments in leveling may be possible. However, irregular

installation, surface level or out of square conditions can result in serious problems for your
installation. Please note that some adjustments and drilling may be necessary. Please protect all

primary surfaces of the product during installation.

Never

set your glass down directly onto a

tile floor.

Always use a piece of wood or cardboard to protect the bottom edge and corners of

the glass.

5.

Please, NOTE! This door has an out-of-plumb adjustment of up to 3/4” per wall profile.

Tools Required

Caulk

Tape
Measure

Pencil

Screwdriver

Phillips

Level

Gun

Caulk

Drill

Electric

Hammer

Drill bit

Drill bit

(Ø=5/16") (Ø=1/8")

«
1
2
3
4
...
»

Содержание BUTTERFLY+ENCLOSURE

















Отзывы:

Нет отзывов