1
2
2
3
4
5
6
7
ILLUSTRATIONS
Dear Customer,
You have chosen to purchase a DREAMLED Solar Flame Light
SFL-200. We thank you for this purchase and hope that your
experiences with this quality product will be pleasant ones.
Prior to using this product, you should carefully read these user
instructions so that you can install and operate your SFL-200
accordingly. Please keep these user instructions so that you
can reference them later on.
INTRODUCTION
CHARGING WITH MICRO USB
PARTS & ACCESSORIES
1.
360° Torch light (2x)
2.
Solar Panel with integrated light sensor
3.
ON/OFF – Mode button
4.
Micro USB charge connection
5.
Battery replacement compa cover
6.
Ground stake connection
7.
Ground stake (2x)
SOLAR PANEL
The SFL-200 is a Solar outdoor torch light with integrated light
sensor. The solar panel acts as the major energy source: it
converts sunlight into electricity and recharges the internal
battery. Please note that when positioning the lamp, the solar
cells require as much DIRECT SUNLIGHT as possible (at least
10 hours). The longer the solar cells are exposed to direct
sunlight, the longer the lamp will stay ON during the night. When
there is almost no direct sunlight during the day (possibly in
wintertime), you can also charge the lamp by Micro USB quickly.
USAGE LOCATION
When the lamp is located in a place that receives less sunlight,
it will operate fewer hours per night, depending on the selected
lighting mode. Night lighting time can also vary depending on
how bright the sky is on any given day.
Insufficient charging of the battery will affect performance
and may result in the fact that the lamp goes off before dawn
because the battery was not fully charged.
The solar panel is best directed as much as possible towards the
south in order to maximize exposure to direct sunlight. Please
note that the four different seasons (and the sun’s angle in these
4 season periods) can affect the lighting time of the lamp.
Select a location that is not located close to other light sources,
such as for example street lighting, because this enables the
lamp to be switched off automatically. Maximum lighting time
depends on sunlight and daytime charging. Minimum charging
time is 5~8 hours in direct sunlight.
INSTALLATION
Insert one side of the USB charging cable into a power source
such as a USB Home charger, laptop, computer, powerbank,..
and connect the other side of the cable with the SFL-200 Micro
USB connection (4).
OPERATION
This lamp is intended for outside use, but can be used indoor
(optional holder available on our website)
Choose a stable, solid and supportive surface and make sure
the lamp is mounted with the solar panel faced towards the sun.
Insert the included ground stake (6) into the ground stake connection
(6) and place the lamp with the ground stake into the ground.
The solar cells will now start charging the lamp and it is advised
to leave the lamp for 3-4 days in order to fully charge the battery
or you can charge the lamp directly by the micro USB port.
CLEANING
The SFL-200 has 3 lighting modes which can be selected by
pressing the Mode Button (3).
Turn your device on by pressing the ON/OFF button (3). The
lamp will automatically start in the first mode: Slow flickering
flame light.
By pressing the Mode button (3) again, the second setting will
start: Fast flickering Flame light.
By pressing the Mode button (3) a third time, the last setting will
start: Always ON. The lamp will now be fully lightened without
flame effect. To turn the light off, press the Mode button (3) a
fourth time.
To test the mode function or if your lamp is charged, go to a
dimly lit or dark room and turn on the lamp. Normally it should
start working. If you have no darkened room at your disposal,
you can also cover the solar panel with your hand.
Make sure the solar panel is kept dust free and clean. Clean it
regularly (1x per month) with a dry cloth and with warm soapy
water. Dirty solar panels may not fully charge the battery. This
can lead to premature aging of the battery and may result in
unreliable operation of the device.
WATERPROOF
IP54
