4
EN
SYMBOLS
Protection class II
Prohibited actions
Carefully read the operating
instructions
Important note
Warning
Children under 3 years old not
allowed
Do not use folded or creased
Do not insert pins or needles
Wash at maximum 40° C on a
wool programme
Do not bleach
Tumble drying possibile at low
temperature
Do not dry clean
Do not iron
DESCRIPTION OF THE APPLIANCE
Refer to the illustrative drawing at the beginning of this instructions booklet to verify your appliance
equipment.
1. Blanket connector
2. Control connector
3. Bottom sheet
4. Top sheet
5. Duvet/Cover
6. Label
7. Underblanket
8. Mattress
9. Mains socket
10. Led display
11. 1-5 All night use
temperature settings
12. Fast pre-heat setting -
Ready for Bed in 5 minutes
13. Timer display 1 hour or 9
hours
14. Timer/standby button
15. Ready for bed fast pre-heat
button
16. Temperature button
17. Standby display
18. On/off switch
POSITIONING AND FITTING INSTRUCTIONS
WARNING! The underblanket must only be placed on top of
the mattress. Do not use as an Overblanket.
POSITIONING THE UNDERBLANKET (Refer to Diagram B and C on page I)
Open the folded blanket and place on your mattress, leaving room for pillows. Smooth out any packing
folds. Lay the electric underblanket (7) on the mattress (8) without putting it underneath the pillows. Make
sure that it is smoothly spread out (Diagram B). Secure your blanket to the mattress with the mains lead at
the pillow end. Pull the elasticated strap (A) (Diagram C) over and under the top of the mattress, as shown
in Diagram C. Attach the elasticated corner straps (B) over the bottom corners of the mattress. Ensure
that the blanket is smooth and secured to the mattress.
To finish dressing the bed (Diagram B). Place the bottom /fitted sheet on top of the electric blanket, then
finish making the bed as normal with a top sheet (4) and duvet (5).
Frequently check to see that your blanket is properly secured to the mattress.
MI002683_N39.indd 4
30/03/17 16:04
