Due to the display size, the entire menu shown below is not visible at the same time. Pressing the up
and down arrows will scroll the display to show the rest of the menu. This is a special purpose menu
for the valve sensor. The menu parameter settings are described in the table below.
The following settings are useful for a 1 valve setup. The valve sensor should be plugged into the
Sensor1 port.
Parameter
Options
Description
V1 Drop1 Size
Numeric value
between 000 and
999
The number of milliseconds that the valve will be
open to release a drop.
V1 Drop2 Delay
Numeric value
between 000 and
999
The number of milliseconds after the first drop to
start the second drop.
V1 Drop2 Size
Numeric value
between 000 and
999
The number of milliseconds that the valve will be
open to release the second drop.
Flash Delay
Numeric value
between 000 and
999
The number of milliseconds to wait after the
second drop to trigger the flash.
Flash Delay Auto
Inc
Numeric value
between 0 and 9
The number of milliseconds to automatically
increase the flash delay between each shot.
Each time you press Activate the valve will be
activated and the “Flash Delay” menu setting
above will be updated with a new value if this is
non-zero.
