5. Installation method
Ensure select all the right adapter before installing the water filter.
The diameter of the faucet is 15-24mm.
Check the faucet type, and select the proper adapter.
The water filter with the adapters suit for most of the kitchen faucet,
but may be not suit for some unnormal and nonstandard faucet.
The faucet water pressure must be between 0.1-0.4MPa, If the
pressure is less than 0.1MPa, the water flow will be less, if higher than
0.4MPa, it will damage the water filter.
a. Internal thread faucet installation
For taps with an aerator (thread inside) with a diameter of 21.55 mm or 23.5 mm.
b. External thread faucet installation
For taps with an aerator (thread inside) with a diameter of 20.5 mm or 23.5 mm.
1.
Remove connecting nut from the mail body.
2.
Remove the tap aerator and choose matching adapter.
3.
Install the connecting nut onto the tap, place & tighten adapter
over the tip of the faucet.
4. Screw the connecting nut firmly onto the main body.
1.
Remove connecting nut from the mail body.
2.
Remove the tap aerator and choose matching adapter.
3.
Install the connecting nut onto the tap, place & tighten adapter
over the tip of the faucet.
4.
Screw the connecting nut firmly onto the main body.
1.
2.
3.
5
