DreamCatcher ME1000 RF, Быстрый старт

Страница: 13 / 23

http://dreamcatcher.asia/cw
cw.enquiry@dreamcatcher.asia
ME1000 RF Circuit Design
Quick Start Guide - 13/23
Step 3 : Verifying the Transmitter Unit
•
Click Frequency Synthesizer
Off to turn it on. Set the
frequency to 818 MHz.
Verifying the Synthesizer
•
Connect the spectrum analyzer
to the Synthesizer Out port of
the transmitter unit.
•
Check if the output signal from
the synthesizer is correct.
Verifying the Mixer
•
Click Up-Converter Off to turn
on the mixer.
TX control panel
Transmitter unit
Synthesizer Out port
Spectrum analyzer
1
1
2
2
3
3
4
4
TX control panel
N9320B Spectrum Analyzer setting: “[ ]”: Hardkey; “{ }”: Softkey
Center Freq: 818 MHz
[Frequency] > [818] > {MHZ}
Span: 10 MHz
N9320B setup: [SPAN] > [10] > {MHZ}