Overheat protection
All electric blankets are fitted with our overheat safeguard system.
This offers protection against overheating or damage to the
element by disengaging the power to the heating element before
any overheat hazards occur.
Important
Check daily that your blanket is flat, fully spread out and secured
before switching on.
Failure to observe these instructions will cause overheating.
This will activate our overheat safeguard system, thus
leaving the blanket inoperative, voiding all warranties.
1. Use as an under blanket only. Not recommended for Futon or
similar bedding system.
2. This blanket is not recommended to be used on an adjustable
bed. If used on an adjustable bed, check that the blanket or cord
cannot become caught or rucked.
3. Make sure that the heating area (element) on any side of the
bed does not hang over the edge of the mattress, that means of
attachment are adequate and suitable for the particular mattress,
and that the instructions which follow are read carefully before
using the blanket.
4. The appliance is not intended for use by young children or infirm
persons without supervision. For human use only, not pets.
5. Young children should be supervised to ensure that they do not
play with the appliance.
6. Prolonged application at the high setting can result in skin burns.
7. Do not tuck in.
8. Do not use tucked or folded.
9. Keep the control unit away from an open window.
10. Do not use pins-they may damage the electric wiring.
11. Be sure that this blanket is used only on an alternating current
supply circuit of the proper voltage.
12. The supplied flexible cord and switch must, as far as practicable,
be kept outside the bed.
13. Do not switch the power on if the blanket is wet or in folded
state.
