Dreambox DM7080 HD, Руководство пользователя

Страница: 54 / 81

Manually setting an IP address
These settings are only needed if you want to configure your Network manually.
1. With the
Navigation-Buttons ( NH )
choose the cable based network
“Wired”
and press the
OK-
Button
.
2. Press the
yellow Options-Button
.
3. With the
Navigation-Buttons (
NH
)
choose the option
"‘Method (IPv4)"’
and press the
OK-
Button
.
4. With the
Navigation-Buttons (
JI
)
choose the option
"‘manual"’
and press the
OK-Button
.
Address (IPv4) Enter the IP address here.
Free IP-Addresses:
192.168.0.2 - 192.168.0.254
Mask (IPv4) Enter the subnet mask (Usually 255.255.255.0).
Gateway (IPv4) Enter the router’s IP address here, if the Dreambox is connected to the Internet by a
router.
Usually this is:
192.168.0.1
To save the settings and activate the network connection press the
OK-Button
.
DNS-Settings
1. With the
Navigation-Buttons (
NH
)
choose the cable based network
“Wired”
and press the
OK-
Button
.
2. Press the
blue Options-Button
to open the DNS-Settings dialog.
The colored buttons in this menu are mapped to the following functions:
red Options-Button Delete selected nameserver.
green Options-Button Add IPv4-nameserver.
yellow Options-Button Add IPv6-nameserver.
blue Options-Button Skip changes.
Note: If you have set the
“Method (IPv4)”
option to
“dhcp”
you won’t have to enter anything here
since this will be done automatically.
Nameserver Enter the DNS-Server’s IP address here. DNS is used to translate a Domain name to an IP
address. Normally, if the Type is set to LAN, there is no need for a DNS entry. If the Dreambox is
connected to the Internet over a router, enter the router’s IP address here.
49