2
3
Unscrew the handle from the door on
the side you need to have access
blocked using the appropriate screw
driver or Allen key. Store all parts
safely.
NOTE:
leave the far side door handle
(the door handle not being locked) in
place, do not remove.
Door should look similar
to this when handle is
removed.
To Engage
To Disengage
INSTALLATION
OPERATION
Position the Lever Lock,
over the spindle and
existing screw holes.
Before screwing into place,
again test the Loop will fit evenly
over your door handle.
Check it is positioned so
the Loop will fit over the door
handle when assembled.
Ensure it is
horizontal
and level.
ADULT ASSEMBLY REQUIRED.
KEEP SMALL PARTS AWAY FROM CHILDREN DURING ASSEMBLY.
Spindle
2
3
Allen
KEY
Squeeze side
Tabs
on the
Loop
and rotate up and over the
door handle until the
Loop
locks into place past the
Locking Catches.
Release
Tabs.
The
Loop
must not be able to
rotate down.
Squeeze in the
Side Tabs
on
the
Loop
and rotate down over
the door handle until the
Loop
locks in the down position.
Release
Tabs.
The
Loop
must not be able to
rotate up.
Note:
The Loop locks in both the up and down position to
prevent children from Engaging or Disengaging the product.
When Lever Lock is Engaged in most cases you cannot open the
door from the opposite side of the door, so door handles on both
sides of door could be locked.
When blocking access to a room is not required, always ensure
this item is Disengaged to avoid being locked in a room.
Tabs
Loop
4
5
6
Allen
KEY
