INSTRUCTIONS
Retractable Gate
F820N
(white)
F943N
(black)
WARNING
WARNING–
Incorrect installation can be
dangerous.
WARNING–
Do not use the safety barrier if
any components are damaged or missing.
WARNING–
The safety barrier must not be
fitted across windows.
WARNING–
Never use this gate without
securely installed Locking Brackets and
Locking Hooks.
This safety barrier conforms to
EN1930:2011;
This safety gate is for domestic use only;
This safety gate has been designed for use
with children up to 24 months of age;
Never use with a child able to climb over or
dislodge/open the gate;
The surfaces that the gate is to be fixed to
must be suitable for the purpose and must
be structurally sound;
The clearance space between the Base of
Casing and the floor MUST NOT exceed
0.3cm (0.12in);
If the safety gate is used at the bottom of
stairs to prevent the child climbing up the
stairs, it must be placed at the front of the
lowest stair;
If the safety gate is used at the top of the
stairs to prevent child falling down the stairs,
it must not be placed on any stair below the
level of the top stair;
At the top of landing, position the gate
15cm (6in) away from the top step;
This safety gate has a manual close system;
This safety gate must NEVER be used as a
pool or pond barrier;
Never leave a child unattended.
This safety gate does not replace proper
adult supervision.
Patent No. 1/604,922
IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE
Read the entire instructions before assembling and installing this product.
If you sell or give away this product, make sure you give this instruction to the new owner.
INSTALLATION
Included
Pr
e-a
ssemb
led
PARTS LIST
A
E
F
D
I
H
J
L
K
M
B
C
G
Optional
Spacer Sets
(sold separately)
See Accessories
Panel
*
Optional
Spacer Sets
(sold separately)
See Accessories
Panel
*
Have on hand a tape
measure. pencil. drill with
4mm (5/32 x1in) drill bit
and a Phillips head
screwdriver.
A
Gate Panel
B
Cover
C
Upper Bracket (x2)
D
Lower Bracket (x2)
E
Upper Hook (x2)
F
Lower Hook (x2)
G
Locking Rod
H
Screws 4x25mm (
5/32
x1in) (x16)
I
Masonry/Brick Plugs (x16)
J
Templates (x2)
K
Base of Casing
L
Top of Casing
M
Release Button
Before you start
WARNING:
This package contains small parts and sharp points in an
unassembled state. Keep out of reach of children. Adult assembly required.
This gate can cover
an area of up to
140cm (55in).
Includes 2 sets of mounting
brackets for convenient
'clip-on/clip-off' relocation
Optional
Accessories
(sold separately)
F821N Spacer Sets (white)
F944N Spacer Sets (black)
For use when gate is fitted to
Skirting boards / Baseboards
F895 Gate Adaptor Panel
To provide a flat surface
to install gate.
*
inside
frame
outside
frame
E
F
2
1
c
D
F820N.F943N IM_p1-p4_BASEDv2_2016.02.26
B1 B2
