Top view of gate
Side view of gate
bracket
spacer
hook
spacer
skirting board
baseboard
INSTALLATION
INSTALLATION
1. Choose best location for gate
Ensure the surface you are mount the gate is structurally sound such as solid timber, brick or masonry. For plaster/gyprock surface, locate the timber
beam or stud behind and mount in this location (mounting on plaster/gyprock alone is not strong enough and not safe). Do not mount to glass.
1b.
Opening direction of the gate can be changed to suit
wall
wall
1a.
Gate can be installed outside or inside door openings
MAX – 140cm/55in
MAX – 130cm/51in
mounted
outside
opening
mounted
inside
opening
1c.
If the gate is used at the bottom of the stairs
to prevent the child from climbing up the
stairs, it must be placed on the lowest stair.
1e.
Make sure that the gate is mounted firmly and evenly in vertical position.
Bottom of stairs
1d.
If the gate is to be used at the top of the stairs to
prevent the child from falling down the stairs, it
must not be placed on any stair below the level of
the top stair.
At the top of landing, position the gate 15cm (6in)
away from the top step.
Top of stairs
15cm
6in
1f. Skirting boards (baseboards)
If there is a skirting board (baseboard) to which the Retractable Gate is to be attached, build up the wall areas equivalent to
thickness of baseboard (skirting board) with Spacers F821N/F944N (sold separately).
1g. Adaptor Panel
To provide a flat surface to install gate.
For 1.25cm (1/2in) skirting or
baseboards use:
For 1.90cm (3/4in) skirting or
baseboards use:
A1
A1
B1
B1
B2
A2
+
+
To purchase accessories, contact Tee-Zed Products for your nearest retail outlet:
info
@
tee-zed.com.au
Accessories
(sold separately)
F821N Spacer Set (white)
F944N Spacer Set (black)
A1 Bracket Spacer –
1.25cm (1/2in)
B1 Hook Spacer –
1.25cm (1/2in)
A1+A2 Bracket Spacer –
1.90cm (3/4in)
B1+B2 Hook Spacer –
1.90cm (3/4in)
F895
Gate Adaptor Panel
1.
2
B1
B2
wall
