Reposition Barrier Gate and
drill screws into place.
9.
Position in desired location with
Wall Mounts (E) flat against the wall.
6.
Keep maximum
distance between
fittings
X
and
Y
.
Position
Y
as close to
the ground as possible.
If mounting above
skirting boards install
Y
directly above and
touching the top edge
of skirting board.
X
Y
Use pencil to mark screw
holes positions.
7.
Remove Barrier Gate and drill pilot holes for screws.
8.
NOTE:
For plaster/gyprock surface,
locate the timber beam or stud behind
and mount in this location (mounting
on plaster/gyprock alone is not strong
enough and not safe).
NOTE:
For brick or masonry
use Masonry Plugs (G).
= hole
2mm
5/64in
= hole
5.5mm
7/32in
F x8
F x8
Gx8
FOR TIMBER
FOR BRICK/MASONRY
E
Tighten each Tension Knob (D)
to secure the position.
10.
6
