manualshive.com logo in svg

Dream Vision Inti R699800 series, Руководство пользователя

Поделиться
Скачать
Dream Vision Inti R699800 series Скачать руководство пользователя страница 42

8.0  MAINTENANCE

42

R699800 - Inti Series User Manual

•

Loosen the screw on the lamp trap at the rear of this unit.

•

Open the lamp Cover and loosen the 2 screws on the lamp unit to release it.

•

Pull out the lamp unit using the handle.

•

Insert the new lamp unit until it is firmly in place.

•

Tighten the screws of the lamp unit.

•

Attach the lamp cover and fasten the lamp trap screw.

Resetting Lamp Time

After 

installing a new lamp, reset the lamp time 

u

sing the OSD menu

.

a) Turn On the unit.

b) Browse into the menu Function => Reset Lamp Time.

c) Confirm time reset.

Alternative method in standby mode, using the remote control. 

a) Plug this unit to Main power.

b) When the projector is in standby mode (red STANDBY/ON led), use the remote control and press sequentially
the [BACK] - [OK] - [HIDE] within 1 second interval then [DOWN] for at least 2 seconds.

c) The sequence is successful if the STANDBY/ON and LAMP leds blink alternately for 3 seconds. 

8.4

Cleaning and Replacing the Dust Filters

The filters must be cleaned regularly to allow an efficient air intake. Otherwise, dirt may enter the unit and
appear on the screen, preventing you from enjoying the video fully. If dirt has entered the unit or if you need
information about the filter, please consult your authorized dealer. A filter cleaning warning appears every
500 hours.

Cleaning procedure

Pull out the power plug from the outlet while the projector is in standby mode.
Push up and lift the claw of the filters, pull out the filters.
Clean the filters with water and dry them, avoiding direct sunlight. In extremely soiled cases, use of a neutral
detergent is recommended. Insert the filters in their original positions and make sure that the claws are firmly
inserted.

C

AUTION

 D

URING

 R

ESET

 W

ORK

Reset the lamp time only when you have replaced the lamp.
Never reset it when the lamp is still in use. Otherwise, the approximate standard for gauging replacement time may
be inaccurate, lamp performance may deteriorate and lamp blowout may occur.

Dust Filters

Содержание Inti R699800 series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды