Dream Maker Spas B6L Series, Руководство пользователя

Страница: 12 / 26

CAUTION: Drain waste water may contain chemical residue and unsanitary contaminants which
could be a hazard to health or the environment. Drain to specified sanitary sewer only.
WARNING: DO NOT SUPPLY POWER TO AN EMPTY SPA!
LOCATION OF ELECTRICAL CORD & DRAIN
FOR
B6L
AND
B6LH SERIES
The spa equipment requires a 15 amp outlet, dedicated to the spa. The use of a extension cord will void your warranty.
Carefully read all of the safety requirements before plugging in the spa.
EACH TIME BEFORE FILLING THE SPA
1. Check to be sure that the shut off valve is closed (turn
handle clockwise until it stops).
2. Safety cap is securely in place.
3. If the drain valve is facing a wall, leave enough space
between valve and wall (6” minimum) in order to have
enough space to connect a garden hose.
TO DRAIN THE SPA
1. Unplug the electrical power cord. Do not supply
electrical power again until spa is refilled.
2. Remove the drain cap that’s threaded on valve.
3. Attach a standard garden hose to the threaded part of
the drain.
4. Place the other end of the garden hose in a drain area.
5. Twist counter clockwise and pull to open the shut off
valve and monitor the draining.
Find G.F.C.I. power plug located below the right
corner of the equipment access door and cut
the white tie. Pull G.F.C.I. along with power cord and inspect
the full length of the cord for any damage before
each use. If cord get’s tangled, remove
equipment access door. (see next picture) Remove & save access panel screws. Use
caution when reinstalling the screws. Do not
overtighten.
The spa drain valve assembly consists of a garden hose connector with a twist on/off valve and a safety drain cap. It is located behind the waterfall
(outside) at the bottom of the spa.
10