Dream Catcher ME3100, Быстрый старт

Страница: 20 / 25

http://dreamcatcher.asia/cw
cw.enquiry@dreamcatcher.asia
ME3100 Analog Circuit Design
Quick Start Guide - 20/25
Keysight Measurement Manager Soft Front Panel (Oscilloscope)
Figure D-86
– Soft Front Panel of the Oscilloscope
Figure D-86 D-8 shows the graphic user interface of Keysight Modular Oscilloscope under Keysight
Measurement Manager together with the label of each panel. Table D- D-4 shows the features of each
panel of the interface.
Table D-4
– Features of the AMM Oscilloscope Interface
No. Panel Description
1 Oscilloscope toolbar Consists of oscilloscope tools
2 Waveform Acquisition tab Displays the time-domain waveform for the oscilloscope
3 FFT Analysis tab Displays the FFT spectrum of the signal
4 Configuration summary Displays the configured functions and settings
5 Waveform graph display Displays the output of the data acquired
6 Scope control tabs Consists of all the sub functions of the oscilloscope
7 Measurement Results panel Displays the measurement results of the scope operations
8 Status tab Displays the status panel, which shows the history of operations
9 Refresh rate Displays the graph update rate in frame/sec.
10 Video Sampling Rate
Displays the video sampling rate (in number of samples per second taken from a
continuous signal)
11 Calibration Delta Temp. indicator Displays the calibration delta temperature of the connected device
Analog Controls
The analog control panel of the interface consists of a vertical control and a horizontal control that are
used to control and set the waveform of the graph display. The vertical control is used to change the