Dreadbox Erebus V3 Ctrlr panel documentation and instructions
v2.0
Page 44 of 49
Using a controller to move the buttons
If you connected a controller like the Novation SL MkII then you can benefit from moving all knobs of
the panel from your controller.
This has been achieved by assigning Midi CC controller numbers to all the knobs.
Of course
, as nothing is changed in the hardware, moving the knobs from your controller will not
affect the sound as such.
When, for example, connecting your Erebus V3 and controller in full USB mode:
─
Connect the Erebus V3 to the computer by USB
─
Connect your master keyboard /
controller to the computer by USB
(connecting the master keyboard by USB
to the computer gives you the possibility
to use it for the Erebus V3 but also for
VST plugins or other soft synths)
─
Power the Erebus V3 On
─
Start the Erebus V3 panel
─
In the
Midi
menu, select
Input
–
Device
your_master_keyboard
─
In the
Midi
menu, select
Input
–
Channel
1
(set this to the Midi channel of your
Erebus V3). This is done to receive notes
from the master keyboard.
─
In the
Midi
menu, select
Output
–
Device
Erebus V3
─
In the
Midi
menu, select
Output
–
Channel
1
(set this to the Midi channel of your Erebus V3). This
is done to send Global Settings and Notes to the Erebus V3
─
In the
Midi
menu, select
Midi Thru – Input Device -> Output Device
. This is done to send the
received notes to the synth
Controller numbers are the following: