Dražice OKCE 100 S/2.2 kW Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 23

Dražice OKCE 100 S/2.2 kW Скачать руководство пользователя страница 4

- 4 -

1

TECHNICAL SPECIFICATION OF PRODUCT

1.1

FUNCTION DESCRIPTION

OKCE line water heaters use only electricity for heating. Their nominal performance provides sufficient
amount of hot water for flat units, premises, restaurants, and similar establishments.

1.2

PRODUCT DESCRIPTION

The  heater  tank  is  welded  from  a  steel  sheet;  it  is  entirely  coated  with  hot  water  resistant  enamel.  For
additional corrosion protection a magnesium anode is mounted in the upper part of the heater to adjust
the electric potential inside the tank, lowing the risk of corrosion. All types have the outlets of hot and cold
water and a circulation opening welded to them. The tank is insulated with 65 mm of polyurethane foam.
The heater shield consists of a steel, powder-paint coated, sheet; the connecting parts are metal coated.
For  heaters  100  –  125  l  is  a  flange  welded  onto  the  upper  bottom  of  the  receptacle  with  a  flange  lid
screwed to it. A sealing ring is inserted between the flange lid and the flange.

Thermo  wells  for  the  safety  thermostat  sensors  and  capillar  thermometer  installation  are  placed  in  the
flange  lid.  Wiring  is  placed  under  the  plastic  removable  cover.  Under  a  plastic  cover  on  the  side  of  the
heater,  there  is  a  cleaning  and  revision  opening  ended  with  a  flange;  various  performance  heating  units
may be mounted into the opening. The heater is to be placed on the ground.

Tanks between 100 and 250 litres are tested with the pressure of 0.9 MPa; 300 litre tanks are tested with
1.5 MPa.

«
...
2
3
4
5
6
...
»

Содержание OKCE 100 S/2.2 kW
























Отзывы:

Нет отзывов