background image

 

Copyright Information 

Copyright 
Declarations 

 

Copyright 2008 All rights reserved. This publication contains information that is 
protected by copyright. No part may be reproduced, transmitted, transcribed, 
stored in a retrieval system, or translated into any language without written 
permission from the copyright holders. 

Trademarks 

 

The following trademarks are used in this document:   

z

 

Microsoft is a registered trademark of Microsoft Corp. 

z

 

Windows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are 
trademarks of Microsoft Corp.   

z

 

Apple and Mac OS are registered trademarks of Apple Inc. 

z

 

Other products may be trademarks or registered trademarks of their 
respective manufacturers. 
 

Safety Instructions and Approval 

Safety 
Instructions 

 

z

 

Read the installation guide thoroughly before you set up the router. 

z

 

The router is a complicated electronic unit that may be repaired only be 
authorized and qualified personnel. Do not try to open or repair the router 
yourself. 

z

 

Do not place the router in a damp or humid place, e.g. a bathroom. 

z

 

Do not stack the routers. 

z

 

The router should be used in a sheltered area, within a temperature range 
of +5 to +40 Celsius. 

z

 

Do not expose the router to direct sunlight or other heat sources. The 
housing and electronic components may be damaged by direct sunlight or 
heat sources. 

z

 

Do not deploy the cable for LAN connection outdoor to prevent electronic 
shock hazards. 

z

 

Keep the package out of reach of children. 

z

 

When you want to dispose of the router, please follow local regulations on 
conservation of the environment. 

Warranty 

 

We warrant to the original end user (purchaser) that the router will be free from 
any defects in workmanship or materials for a period of two (2) years from the 
date of purchase from the dealer. Please keep your purchase receipt in a safe 
place as it serves as proof of date of purchase. During the warranty period, and 
upon proof of purchase, should the product have indications of failure due to 
faulty workmanship and/or materials, we will, at our discretion, repair or replace 
the defective products or components, without charge for either parts or labor, to 
whatever extent we deem necessary tore-store the product to proper operating 
condition. Any replacement will consist of a new or re-manufactured 
functionally equivalent product of equal value, and will be offered solely at our 
discretion. This warranty will not apply if the product is modified, misused, 
tampered with, damaged by an act of God, or subjected to abnormal working 
conditions. The warranty does not cover the bundled or licensed software of 
other vendors. Defects which do not significantly affect the usability of the 
product will not be covered by the warranty. We reserve the right to revise the 
manual and online documentation and to make changes from time to time in the 
contents hereof without obligation to notify any person of such revision or 
changes. 

Be a Registered 
Owner 

Web registration is preferred. You can register your Vigor router via 
http://www.draytek.com.  

Firmware & Tools 
Updates 

Due to the continuous evolution of DrayTek technology, all routers will be 
regularly upgraded. Please consult the DrayTek web site for more information on 
newest firmware, tools and documents. 

http://www.draytek.com 

 

Содержание VigorIPPBX 2820 Series






























Отзывы: