Draytek VigorAP 900, Руководство пользователя

Страница: 154 / 207

VigorAP 900 User’s Guide 144
minutes. (You need to setup WPS within two minutes).
3
3
.
.
1
1
0
0
.
.
5
5
A
A
P
P
D
D
i
i
s
s
c
c
o
o
v
v
e
e
r
r
y
y
VigorAP 900 can scan all regulatory channels and find working APs in the neighborhood.
Based on the scanning result, users will know which channel is clean for usage. Also, it can
be used to facilitate finding an AP for a WDS link. Notice that during the scanning process
(about 5 seconds), no client is allowed to connect to Vigor.
This page is used to scan the existence of the APs on the wireless LAN. Yet, only the AP
which is in the same channel of VigorAP 900 can be found. Please click
Scan to discover all
the connected APs.
Each item is explained as follows:
Item Description
SSID Display the SSID of the AP scanned by VigorAP 900.
BSSID Display the MAC address of the AP scanned by VigorAP 900.
RSSI
Display the signal strength of the access point. RSSI is the
abbreviation of Received Signal Strength Indication.
Channel Display the wireless channel used for the AP that is scanned by
VigorAP 900.
Encryption Display the encryption mode for the scanned AP.
Authentication Display the authentication type that the scanned AP applied.
Scan It is used to discover all the connected AP. The results will be
shown on the box above this button
AP’s MAC Address If you want the found AP applying the WDS settings, please
type in the AP’s MAC address.
AP’s SSID To specify an AP to be applied with WDS settings, you can
specify MAC address or SSID for the AP. Here is the place
that you can type the SSID of the AP.
Select as Universal
Repeater In Universal Repeater mode, WAN would work as station
mode and the wireless AP can be selected as a universal
repeater. Choose one of the wireless APs from the Scan list.