Draytek VIGOR2820 series, Руководство пользователя, Страница: 203 / 269

Vigor2820 Series User’s Guide 195
WPA2/802.1x Only- Accepts only WPA2 clients and the
encryption key is obtained dynamically from RADIUS
server with 802.1X protocol.
Mixed (WPA+WPA2/802.1x only) - Accepts WPA and
WPA2 clients simultaneously and the encryption key is
obtained dynamically from RADIUS server with 802.1X
protocol.
WPA/PSK- Accepts only WPA clients and the encryption
key should be entered in PSK.
WPA2/PSK- Accepts only WPA2 clients and the
encryption key should be entered in PSK.
Mixed (WPA+ WPA2)/PSK - Accepts WPA and WPA2
clients simultaneously and the encryption key should be
entered in PSK.
Note: You should also set RADIUS Server
simultaneously if WEP/802.1x Only, WPA/802.1x
Only, WPA2/802.1x Only or Mixed
(WPA+WPA2/802.1x only) is selected.
WPA The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key)
entered manually in this field below or automatically
negotiated via 802.1x authentication. Either
8~63 ASCII
characters, such as 012345678(or 64 Hexadecimal digits
leading by 0x, such as "0x321253abcde...").
Type - Select from Mixed (WPA+WPA2) or WPA2 only.
Pre-Shared Key (PSK) - Either 8~63 ASCII characters,
such as 012345678..(or 64 Hexadecimal digits leading by
0x, such as "0x321253abcde...").
WEP 64-Bit - For 64 bits WEP key, either 5 ASCII characters,
such as 12345 (or 10 hexadecimal digitals leading by 0x,
such as 0x4142434445.)
128-Bit - For 128 bits WEP key, either 13 ASCII
characters, such as ABCDEFGHIJKLM (or 26
hexadecimal digits leading by 0x, such as
0x4142434445464748494A4B4C4D).
All wireless devices must support the same WEP
encryption bit size and have the same key.
Four keys can
be entered here, but only one key can be selected at a
time. The keys can be entered in ASCII or Hexadecimal.
Check the key you wish to use.
3 3 . . 1 1 3 3 . . 4 4 A A c c c c e e s s s s C C o o n n t t r r o o l l
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the
Access Control , a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights.