4
Vigor2600VGi
P1, P2, P3, P4
WL
These indicators are dual-color LEDs : Yellow means the port is connected to a
10Mbps device, and Green indicates the connected device is 100Mbps.
PWR
Printer
To connect a USB based printer.
Only the power adapter comes with the package can be connected to the PWR.
These switch ports should be connected to your local PCs.
P1, P2, P3, P4
The restore default settings : While the router is running (ACT LED blinking),
press the button and hold for more than five seconds. The ACT LED begins to
blink rapidly, then release the button. The router will restart with the factory
default configuration.
Factory Reset
LAN
ON when the connected network device has been linked up correctly. Blinking
when there are Ethernet packets passing through the switch port.
ON when the ADSL line is showtime.
To connect analog phone.
ADSL
To connect the ADSL cable to your telephone jack.
LED Indicators
Descriptions
ACT
(Activity)
Blink when power is supplied to the router and the router is running normally.
Blinking when thre is a successful remote connection on the ISDN BRI B1 /
B2 channel.
ON when the ISDN network is correctly setup.
Descriptions
Back Panels
Connected to an external NT1 (or NT1+) box provided by your ISDN service
provider.
Phone(V1, V2)
ON when the ADSL line is showtime.
ON when you off hook the phone
Blink when a phone call coming
ON when the USB interface printer is ready.
LNK
LINE
Printer
V1, V2
ISDN
