Draytek Vigor130 Скачать руководство пользователя страница 47

Страница: 47 / 288

Vigor130 Series User’s Guide

Note

: At present, the

IPv6 prefix

can be acquired via the PPPoE mode connection

which is available for the areas such as Taiwan (hinet), the Netherlands, Australia and
UK.

Tunnel setup protocol client (TSPC) is an application which could help you to connect to
IPv6 network easily.

Please make sure your IPv4 WAN connection is OK and apply one free account from hexago
After getting the IPv6 prefix and starting modem advertisement daemon (RADVD), the PC
behind this modem can directly connect to IPv6 the Internet.

Available settings are explained as follows:

Item Description

Username

Type the name obtained from the broker. It is suggested for
you to apply another username and password for

Password

Type the password assigned with the user name.

Confirm Password

Type the password again to make the confirmation.

Tunnel Broker

Type the address

for the tunnel broker IP, FQDN or an

optional port number.

After finishing all the settings here, please click

to save the configuration.

Содержание Vigor130

































































































































































































































































































Результаты поиска

Содержание Vigor130

Отзывы:

Draytek Vigor130, Руководство пользователя, Страница: 47 / 288

Результаты поиска

Содержание Vigor130

Отзывы: