Version: 1.5
36
2.3 IVD Slave Device Setup
2.3.1 IVD Slave Front Panel Connection
All connections are made on the front panel of the IVD except power connector. The following
figure shows the connections on the front panel of the IVD.
Factory Reset – A reset button is used to reset system, and then IVD will reboot to factory default
configuration.
Console – A RS232 serial interface is used to connect a local management computer.
MGN – A management interface with RJ45 interface is for Telnet management. Users can set
local PC (personal computer) as the same subnet as IVD and to manage IVD by CLI command.
UPLINK – Support one 1000M Ethernet ports to Internet. The interface can be used as for Telnet
management. Users can set local PC (personal computer) as the same subnet as IVD and to
manage IVD by CLI command.
PHONE – Connected to PSTN normally.
LINE – Connected to ADSL devices or telephones for users.
Figure 2-7. IVD front panel connections overview
Table 2-3. IVD connections
Port
Type, Color
Connected to
Remarks
Power Cord
Cord, Black
Wire with lug
terminal
AC Inlet
DC Inlet
100-240VAC
-42 ~ 56VDC
Console (Serial)
RS232, Grey
Connect to PC RS232
port for debug
--
MGN
RJ-45, Blue
To Intranet with a
management host
UPLINK
RJ-45, Blue
To Internet management
PHONE
RJ-21,
To PSTN
LINE
RJ-21,
To subscriber copper line
