Draytek Vigor 2900V, Быстрое руководство по установке

Страница: 6 / 30

3
1.3 Front Panel LEDs and Rear Panel Interfaces
1.3.1 Vigor2900V
LED Indicators Descriptions
ACT
(Activity)
(P1, P2, P3, P4)
LAN
Phone
(FXS1,FXS2)
QoS
VPN
Printer
WAN
blinking
on
on
on
blinking
on
orange
green
blinking
orange
green
The router is powered on and running properly.
The QoS function is active.
The phone is off hook (the handset of phone is picked up).
A phone call is incoming
The VPN function is active.
The USB interface printer is ready.
A normal 10Mbps WAN link is ready.
A normal 100Mbps WAN link is ready.
A normal 10Mbps connection is through its corresponding port.
A normal 100Mbps connection is through its corresponding port.
Ethernet packets are transmitting.
Status
Connect to the USB printer.
Connect the included power adapter to the power outlet.
Connect to the analog phone for VoIP communication.
Connect to the local networked devices.
Connect the cable/DSL modem to access the Internet.
Descriptions Rear Panels
Printer
PWR
Factory Reset
P1, P2, P3, P4
WAN
FXS1, FXS2
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking), press the hole and keep for
more than 5 seconds. When the ACT LED begins to blink rapidly, release the
button. Then the router will restart with the factory default configuration.
blinking Ethernet packets are transmitting.