Drawmer Masterflow DC2476, Руководство оператора

Страница: 31 / 39

31
Rotate the control knob to
adjust to the required value. Push the control knob
to toggle through the
selections.
CROSSOVER
COMPARE
Press
“compare”
button to access. Press again to return to previous screen.
Left/Right selects
Normalised Input (with Gain),
Current Settings
Loaded Patch Before Edit.
Gain applied at Input section
Turning the knob trims levels for direct
A/B comparison.
Left/Right
toggles
between
“Moniter
Bands” and
“Set X-Over”.
On returning to “set x-over” mode you
will still only hear the highlighted band
as set in “monitor bands” mode. When in “monitor bands” mode pressing the
knob enables you monitor the highlighted band
only.
Cross-over is common to
Expander, Compressor,
Limiter/Width and Tube.
On exiting the x-over
page the full frequency
range is again output.