background image

D62 OPERATORS’ MANUAL

10

IF A FAULT DEVELOPS

For warranty service please call Drawmer Electronics Ltd. Or their nearest authorised
service facility, giving full details of the difficulty. On receipt of this information, service
or shipping instructions will be forwarded to you. No equipment should be returned under
the warranty without prior consent from Drawmer or their authorised representative.

For service claims under the warranty agreement a service Returns Authorisation (RA)
number will be given. Write this RA number in large letters in a prominent position on the
shipping box. Enclose your name, address, telephone number, copy of the original sales
invoice and a detailed description of the problem.

Authorised returns should be prepaid and must be insured. All Drawmer products are
packaged in specially designed containers for the best adequate protection. If the unit
has to be returned the original container must be used. If this container is not available,
then the equipment must be packaged in substantial shock-proof material, capable of
withstanding the handling for the transit.

CONTACTING DRAWMER

Drawmer Electronics Ltd., will be pleased to answer all application questions to enhance
your usage of this equipment. Please address all correspondence to:

Drawmer (Technical Helpline) : Coleman St.: Parkgate : Rotherham : S62 6EL : UK

or, Email us on : 

[email protected]

Drawmer dealers, Authorised service departments and other contact information can be
obtained from our web pages on 

http://www.drawmer.com

TECHNICAL SPECIFICATIONS

(All measurements taken at 0dBu operating level)

Specification with LINE input @ 0dBu, (all effects disabled):

CROSSTALK

- 105dB

(@ +0dB gain)

THD+n @ 1Khz  -2dB 

(soft clip)

- 70dB

(@ +0dB gain)

THD+n @ 1Khz -20dB

- 93dB

(@ +0dB gain)

THD+n @ 1Khz -60dB

-120dB

(@ +0dB gain)

NOISE FLOOR

-123dB

(@ +0dB gain)

POWER REQUIREMENTS

Requires 1962 analogue unit for power.

WEIGHT

 (incl packaging)

0.5. Kgs

In the interests of product development, Drawmer reserve the right to modify or
improve specifications of this product at any time, without prior notice.

Содержание D62















Отзывы: