3
CPA-50
Power Amplifier
CHAPTER 1
The CPA-50 Stereo Power Amp is the
perfect partner for any passive speaker,
and especially in the studio with a set of
passive cube monitors.
Sitting between your monitor controller/
pre-amp and a pair of passive speakers,
the high performance Class D amplifier
delivers 25Wrms per channel into 8 ohms
(50W rms per channel into 4ohms) and
offers features including thermal, overload
and power up/power down protection and fault indication. With just a 6.5” square
footprint, the CPA-50 blends seamlessly with a pair of Yamaha NS10 or Auratone
C5 monitor types, for example, and is small and light enough to fit into a bag to take
anywhere.
As well as working in stereo the CPA-50 can also function as a 100Wrms into
8ohms Monoblock (set via internal jumpers), which allows the system to operate
in bi-amped or bridged modes.
CPA-50
Power Amplifier
Drawmer CPA-50 Power Amplifier Features at a Glance:
50+50Wrms into 4 Ohms@1%THD.
25+25Wrms into 8 Ohms@1%THD.
1x100W into 8 Ohms bridged mode.
Stereo/Bridge internal jumper to use
as a Stereo amplifier or as a
Monoblock in Bridged or Bi-Amp
Modes.
Balanced Neutrik XLR input.
Efficient, low heat design with Low Power Consumption. Consumes
only 6W of power when idling and <0.5W when in standby mode.
Thermal, overload and power up/power down protection.
Standby, fault and clip indicators
Rugged steel chassis. Desktop unit that can be stacked.
Compact and Portable. Dimensions: L 184mm x W 165mm x H 51mm.
