Draper VC300, Инструкция по эксплуатации

Страница: 7 / 12

- 7 -
OPERATING INSTRUCTIONS
THE VC300 IS ASSEMBLED AND READY FOR
USE
TO OPERATE
Connect the vacuum to the power supply. Hold
the handle
✪✌
firmly, with your thumb slide the
switch
✫✌
forward to turn the vacuum on, and
back to turn off.
REMOVAL AND CLEANING OF FILTER
To remove the filter for cleaning depress the
release button
✬✌
and remove the dust
container
✭✌
carefully. Remove the dust filter
✮✌
so you do not disturb any dust collected.
Empty the contents of the dust container. To
clean filter brush away any excess dust/dirt. If
needed the filter can be washed with warm
water. The filter must be dry before re-fitting it to
the dust container.
WARNING
DO NOT OPERATE WITHOUT A FILTER FITTED.
Fig.1
✫✌
✪✌
✭✌
Fig.2
✮✌
✬✌