Motor
does not start
1. Fuse
3. Other
1. Replace/reset time delay
fuse or circuit breaker
2. Have brushes replaced by
authorised service agent
3. Return to authorised
service agent
2. Brushes worn
Machine vibrates
1. Router bit not suitable
for application
3. Incorrect direction of
travel
1. Seek guidance on bit
selection
2. Stop machine. When
stopped, replace with a
sharp bit
3. Change direction of
travel
2. Router bit blunt
Bit will not cut
1. Attempting to remove
excess material
3. Incorrect direction of
travel
1. Reduce plunge depth
2. Stop machine. When
stopped, replace with a
sharp bit
3. Change direction of travel
2. Router bit blunt
16
10. TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REMEDY
NOTE: Remove the plug from the socket before carrying out adjustment, servicing or
maintenance.
