Draper Storm Force 70453 Скачать руководство пользователя страница 20

Страница: 20 / 24

4. INTRODUCTION

4.1 SCOPE

This hand-held cordless car polisher is intended for use on automotive bodywork, or for polishing
applications on other suitable surfaces where a high-gloss finish is required. Do not attempt to use this
product for sanding or grinding purposes as this could damage the motor, invalidating the warranty.
This product is intended for domestic and infrequent light trade use only. Any application other
than that it was intended for, is considered misuse.

4.2 SPECIFICATION

Stock No. ....................................................................................................................................... 70453
Part No. ............................................................................................................................. CPO108SF/K
Disc diameter (backing pad)  ........................................................................................................  73mm
Speed (no load)  ..............................................................................................  0 – 2,500/0 – 7,500r/min
Shaft screw thread ..........................................................................................................................5/16"
Sound pressure level (LpA)*: ..................................................................................................78.6dB(A)
Sound power level (LWA)**:.................................................................................................... 89.6dB(A)
Uncertainty (K): ........................................................................................................................... 3dB(A)
Vibration Level .......................................................................................................................  4.213m/s2
Uncertainty (K): .......................................................................................................................... 1.5m/s2
Weight (nett) ................................................................................................................................. 0.67kg

Battery pack:
Part

No. ......................................................................................................................... CB108LI

Type

.................................................................................................................................. Li-ion

Rated

Voltage

.................................................................................................................... 10.8V

Rating

............................................................................................................................... 1.5Ah

Charger:
Part

No. ................................................................................................................................ C108LI

Rated

Voltage ....................................................................................................................... 230V~

Rated

Frequency ..................................................................................................................... 50Hz

Rated D.C. output voltage ..................................................................................................... 10.8V

Rated D.C. output current ........................................................................................................ 2.0A

Protective device rated current .................................................................................................... 2A

Construction

........................................................................................................................ Class II

* Continuous A-Weighted Sound Pressure Level at the workstation in accordance to and declared

according to EN60745.

** The typical A-weighted noise level determined according to EN60745.

- 5 -

- 20 -

12. OPTIONAL ACCESSORIES

12.1 OPTIONAL ACCESSORIES

A full range of accessories are available from Draper Tools.
Please visit our website for details:

www.drapertools.com

Содержание Storm Force 70453

























Результаты поиска

Содержание Storm Force 70453

Отзывы:

Похожие инструкции для Storm Force 70453

Бренды по названию

Популярные бренды

Draper Storm Force 70453, Руководство пользователя

Результаты поиска

Содержание Storm Force 70453

Отзывы:

Похожие инструкции для Storm Force 70453

Бренды по названию

Популярные бренды