Draper STNE, Инструкция по эксплуатации

Страница: 5 / 8

To load the fasteners and eliminate
jammed fasteners:
1. Ensure machine is unplugged. Just
push staple-feeder pusher inwards
and slightly downwards, thus unhooking
it. Take it all the way out
(
Fig . 2 and Fig . 4.)
Fig. 2
TO OPERATE
There are three safety related
switches, rocker main switch,
switch pin and safety yoke (
Fig. 1 ).
For safe use, the operating steps
should take in the order of:
A. Connect the plug to a socket on
wall or on extension cord.
B. Turn on the main switch.
C. Place the tool so that the safety
yoke is lightly in contact with
the workpiece.
D. Push the switch pin to the right.
E. Press the trigger and press
down the tool instantaneously
so that the safety yoke could
have sufficient stroke to actuate
the fasteners.
Fig. 1
Switch pin
Push button
Open/Lock switch
Safety yoke
OFF
ON
Push button
Fig. 3
Fig. 4
2. Insert one strip of the staples or one
strip of the nails on either slot of the
staple-channel (
Fig. 3 and Fig.4 ).
- 4 -