Case Dimensions & Methds of Installation
SCREEN SIZE
CASE STYLE
Total Drop <148" or viewing width <144"
"S"
Total drop >148" or viewing width >144"
"L"
Case Style “S”
Case Style “L”
Wiring Diagrams
Signature/Series E & V by DRAPER
Page 2 of 2
If you encounter any difficulties installing or servicing your Signature/Series E or V,
call your dealer or Draper, Inc., Spiceland, Ind., (765) 987-7999, fax (765) 987-7142,
or e-mail [email protected].
NOTE: Viewing surface shown is Series V with tab tensioning.
Series E, without tab tensioning, is also available.
Tab-Tension Adjustment
Procedure for Signature/Series V
➀
Determine which side requires adjustment.
➁
Secure dowel with one hand.
Caution: Do not touch or bend surface.
➂
Using Philips-head screwdriver, depress
spring-loaded adjustment screw (see
drawing) and slowly turn clockwise to
tighten tension, or counterclockwise
to loosen tension. The screw adjusts
in ¼ turn increments. Adjust only
one
increment
(¼ turn).
➃
If problem is not corrected, leave screen in
position for 24 hours to allow surface
material to stretch into position.
➄
If problem still is not corrected, repeat steps
2 and 3.
Dowel
Adjustment
Screw
Tensioning
Cable
9
1
/
8
"
7"
11"
Audience
Electrical connection
to internal splice box
on left end of case.
7
/
8
"
knockout for
1
/
2
" conduit.
J-Box cover located under
splice box.
Shown with
1
/
2
"
threaded rod (by
others). Other
mounting hardware
options feasible.
Ceiling Tile and grid
(by others)
Case length
Viewing surface
1
1
/
2
" Typ
2
1
/
8
"
Ceiling grid and
tile (by others)
STOP
Single Station Control
Internal Screen Wiring
White (Common)
Black (Down)
Red (Up)
Green (Ground)
Dashed wiring
by electrician
Control
switch
Single gang box by others
Min. 4" x 2
1
/
8
" x 1
7
/
8
" deep
Blue
Black
Red
Location of key
operated on-off
switch if furnished
To 110-120V Line
Multiple Station Control
Internal Screen Wiring
White (Common)
Black (Down)
Red (Up)
Green (Ground)
Dashed wiring
by electrician
Red
Red
Black
Blue
Blue
Cap off with wire
nut and tape
Black
Red
Blue
Black
Single gang box by others
Min. 4" x 2
1
/
8
" x 1
7
/
8
" deep.
3 shown. More or less equally
feasible.
Location of key
operated on-off
switch if furnished
To 110-120V Line
Low Voltage (& Wireless) Control Wiring Diagram
Control
Switches
24v DC
Black (DN)
Red (UP)
White (COM)
Black (DN)
Red (UP)
White (COM)
Black (DN)
Red (UP)
White (COM)
STOP
Black
Red
White
White
Red
Brown
Black
Yellow
Green
Low Voltage Control Module
Internal Screen Wiring
White (Common)
Red (Up)
Black (Down)
Green (Ground)
Dashed wiring by electrician
Optional Infrared
Receiver Package
Optional
Radio
Receiver
Package
Location of key
operated on-off
switch if furnished
To 110-120V Line
9
1
/
8
"
7"
9
3
/
4
"
Audience
Electrical connection
to internal splice box
on right end of case.
7
/
8
"
knockout for
1
/
2
" conduit.
J-Box cover located under
splice box.
Shown with
3
/
8
"
threaded rod (by
others). Other
mounting hardware
options feasible.
Ceiling Tile and grid
(by others)
