Draper PWP52, Инструкция по эксплуатации

Страница: 6 / 28

5. HEALTH & SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS
NOTE: Water pumps are designed to give safe and dependable service if operated according
to instructions. Read and understand this owners manual fully before operating this pump.
You can help prevent accidents by being familiar with the pump controls and by observing
safe operating procedures.
OPERATOR RESPONSIBILITY
• Know how to stop the water pump quickly in case of emergency.
• Be sure that anyone who operates the water pump receives proper instruction in it’s safe
use.
WARNING!:
CARBON MONOXIDE HAZARDS
• Exhaust gases contain poisonous carbon monoxide, a colourless and odourless gas.
Breathing carbon monoxide can cause loss of consciousness and may lead to death.
NEVER run this water pump in an enclosed space or partly enclosed space.
ALWAYS ensure a high level of ventilation in the area that you intend to use the water pump
to avoid the potential build up of carbon monoxide.
WARNING!:
FIRE AND BURN HAZARDS
• The exhaust system gets hot enough to ignite some materials.
- Keep the water pump at least 3 feet (1 metre) away from buildings and other equipment
during
operation.
- Do not enclose the water pump in any structure.
- Keep flammable materials away from the water pump.
• The muffler becomes very hot during operation and remains hot for a while after stopping
the engine. Be careful not to touch the muffler while it is hot. Let the engine cool before
storing the water pump indoors.
• Petrol is extremely flammable and is explosive under certain conditions. Do not smoke or
allow flames or sparks where the water pump is refuelled or where petrol is stored. Refuel
in a well-ventilated area with the engine stopped.
• Fuel vapours are extremely flammable and may ignite after the engine has started. Make
sure that any spilled fuel has been wiped up before starting the water pump.
PUMP OPERATION
• Do not operate this product without being completely familiar on all safety aspects,
functions and most importantly how to stop the engine in an emergency.
• Never use the pump if the stop switch is FAULTY or not functional.
• Do not use the pump indoors; fumes can kill. Only operate in a well ventilated area and at
least 1M away from buildings.
• Never operate the pump without first priming it fully.
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION
Fuel tank
Fuel tank cap
Muffler [exhaust]
Air filter housing
Throttle lever
Choke lever
Fuel lever
Recoil [pull] start handle
Anti vibration feet
Frame
Main engine switch
Oil level dipstick
Inlet [suction]
Priming opening
Drain
Outlet
HT lead
Spark plug cap
Hose barb
Hose barb coupling
24580 Shown
PROBLEM CAUSE REMEDY
Engine does not
start.
Pumping failure.
1. Check fuel level, if low, refill.
2. Remove plug and check
spark.
3. Contact an authorised
service agent.
1. Check water level, if low,
refill.
2. Strainer maybe clogged,
check to unblock.
3. Check hose clamps are
securely fastened and make
sure that there is no damage
to the pumping hose.
4. Contact an authorised
service agent.
1. Fuel.
2. Spark
3. Other
1. Priming water.
2. Strainer.
3. Air suction.
4. Other.
13. TROUBLESHOOTING
14. DISPOSAL
14.1 DISPOSAL
- At the end of the machine’s working life, or when it can no longer be repaired, ensure
that it is disposed of according to national regulations.
- Contact your local authority for details of collection schemes in your area.
In all circumstances:
• Do not dispose of power tools with domestic waste.
• Do not incinerate.
• Do not abandon in the environment.
• Do not dispose of WEEE*
as unsorted municipal waste.
6 23
21
8