Lace & Grommet
Permanently Tensioned Projection Screen
page 3 of 4
Figure 5
Figure 6
Figure 7
WALL
AT LEAST
18”
CENTER
TOP OF FRAME
BOTTOM OF FRAME
VIEWING
SURFACE
BOTTOM
BRACKETS
ROTATED
180°
Fixed Wall Bracket
Attached to Wall Stud
Securing Bottom of Frame
Fixed Wall Bracket
Attached to Wall Stud
with Frame Hanging
Bungees Properly
Attached to Tube
and Viewing Surface
Section 5 -
Optional Trim
If you order your Lace and Grommet screen with optional trim, the Frame Corners will come with the trim automatically attached
(see Fig. 5)
.
To attach trim to the frame, use included self-tapping screws.
Make sure the end of each trim piece matches the frame section joints, and that they line up evenly across the screen
(see Fig. 6)
.
If there are light gaps, use the included self-adhesive Vel-tex strips. Place the strips on the inside of the trim
(see Fig. 7).
Vel-tex "dots" are also included to use to cover the heads of the self-tapping screws used to attach the trim to the frame.
