Draper FAN3, Инструкция по эксплуатации

Страница: 5 / 8

OPERATING INSTRUCTIONS
- 4 -
1. To stop the fan head from oscillating, pull the clutch knob up.
2. To make the fan head oscillate, push the clutch knob down.
3. The airflow can be adjusted upward or downward by loosening the tilt adjustment
knob and adjusting the vertical angle as desired. Retighten the adjustment knob
securely.
4. The speed is controlled by depressing the buttons located on the panel below the
fan;
0 = Off
1 = Slow
2 = Medium
3 = Fast
IMPORTANT:
Remove the plug from the power supply and wait until the fan has completely stopped
rotating before making any adjustments to it.
CLEANING INSTRUCTIONS
1. Always unplug the fan from the power supply.
2. To disassemble the fan, reverse the sequence of the ‘ASSEMBLING THE
PROTECTIVE BLADE GRILLES’ section.
3. All plastic components should be cleaned with a mild soapy detergent and a damp
cloth or sponge. Ensure all traces of water and detergent are removed before
reassembly.
4. Ensure that water and/or cleaning detergent does not enter the motor housing or
switch mechanism.