- 10 -
Depending on manufacture and model, some engine components do change. Please check with
Autodata or the manufacturer’s data before use.
!
!
9. PROCEDURE AND APPLICATION GUIDE
Set the camshaft in position using component 3 as shown.
Support Tool SE11249
Fit tensioner tool to pulley and slacken bolt A.Turn tensioner in
an anti-clockwise direction to release tension on timing belt.
Remove timing belts from sprockets
Use component 1 to set the cam shaft positions relative
to each other
Please note images are for guidance only and subject to change.
Align the timing marks according to the manufacturer’s instructions and fit the crank-
shaft alignment tool 2 as shown.
