![Draper DSH-IR-B Скачать руководство пользователя страница 16](http://html.mh-extra.com/html/draper/dsh-ir-b/dsh-ir-b_instructions-for-use-manual_2528024016.webp)
10. MAINTENANCE
10.8 MACHINE ERROR CODES.
Machine error codes appear in the temperature indication window.
CODE
E0
REASON
CORRECTIVE ACTION
Machine switch in “on”
position when plugged in.
Power supply switch
manipulation error.
Turn off the power supply then turn
off the switch, and turn on the
power supply then turn on the
machine.
E1
1. Fuel shortage.
Flame detector
(photocell tube
error).
Add fuel.
E2
1. Temperature sensor terminal
disconnected
Temperature
perception sensor
error.
Re-connect temperature sensor
2. Thermostat faulty
Replace thermostat
E3
1. Abnormal overheating
Overheating
prevention sensor
error/ conductive
sensor check
Switch unit off, allow fan to cool
the machine and leave 15 minutes
before attempting re-start
2. Product tipped or overturned
Ensure heater is on a flat, stable
surface
Cn
On going combustion
Normal state
LO
In case of below -9ºC
Normal state
2. Photocell faulty
Clean or replace photocell.
3. Imperfect combustion
Remove fuel and add clean fuel.
4. Photocell contaminated
Remove and clean photocell.
5. Blocked / contaminated fuel filter
Clean or replace.
6. Ignition fault
1. Check ignition plug cable
2. Clean and re-gap ignition plug
16
Содержание DSH-IR-B
Страница 19: ...NOTES 19 ...