3.
Press the WEEK button to select the desired day. These days appear along the top of the
display. (If Mo Tu We Th Fr Sa Su all appear on the display, these days all have the same
power-on time). You can select Mo Tu We Th Fr as a group, or Sa Su as a group, or a single
day.
4.
When you finish steps 1-3 then press the PROG button. 1OFF now appears on the display to
indicate that the first power-off time is ready to be programmed. Repeat steps 2 and 3 to
enter your first desired power-off time.
5.
Press the PROG button again. 2 and ON appears on the display to indicate that the second
power-on time is ready to be programmed. Repeat the same procedure you used in steps 2
through to 4 to enter the rest of your power-on/power off times (up to a maximum of
12 on/12 off times).
6.
Press the PROG button to step through the times you entered to make sure they are correct.
7.
Press the RST/RCL button to reset or recall any timer entries. When you reset (disable) a
particular power-on/off entry, four dashes will appear instead of time. When you recall an
entry, it will return to the values that were set before you performed a reset.
8.
Press the CLOCK button to return to the real-time clock display.
1.
Press the MENU button, “DOWN” appears on the display to indicate that countdown is ready
to be programmed.
2.
Hold down the CLOCK button and press the HOUR, MIN and SEC button to enter the
requested countdown time.
3.
Press the PROG button to start countdown and press the CLOCK button to stop it. MAX.
duration 59 hours, 59 mins, 59 secs.
TECHNICAL DATA
Switching times:
12 x ON, 12 x OFF, up to 84 switching possibilities by programming Mo-Su.
Countdown:
Max. 59 hours, 59 mins, 59 secs.
Alarm:
24 times per day, 1-59 seconds.
Switching load:
16A/250V (4000W).
Power supply:
230V-/50Hz.
Battery:
1 x AAA 1.5V.
1.
Press the MENU button to select the alarm function, when ALARM appears on the display
press the PROG button until seconds “00” appears at bottom of the display.
2.
Press the WEEK/SEC button to set alarm sound period.
NOTE:
The first setting is same as second, third up to 24 alarm sound setting, i.e. First setting is
08 sec. then, second, third up to 24 alarm sound also 08 sec.
3.
Press PROG to set alarm time-press. Hour button to set hour and press MIN button to set
min. Finish the first setting.
4.
Press PROG button to start the second alarm setting, when 1OFF appears on the display you
can start the second alarm setting by repeating 2 and 3.
NOTE:
1OFF is equal to 2ON for alarm setting function.
Although this setting is referred to as ‘alarm’ on the timer, there is no audible alarm
feature built-in.
SETTING COUNTDOWN
SHORT DURATION OVERRIDE
JASES BOOKLET 15/2/02 3:49 PM Page 4
