Draper BV3000, Инструкция по эксплуатации

Страница: 15 / 20

1. Not plugged in.
2. Fuse
blown.
3. RCD Tripped.
4. Cable damaged.
1. Plug in and switch on.
2. Replace fuse with fuse of the same
amperage rating.
Also check fuse in extension lead
plug if applicable.
3. Reset RCD. If problem occurs
again, unplug the machine and
have the machine checked by a
qualified person.
4. Do not use the machine until the
cable has been replaced.
Machine fails to
operate
1. Collection bag full.
2. Collection
chute
blocked.
3. Impeller damaged.
4. Collection bag
damaged or open.
1. Unplug the machine and empty
the bag.
2. Unplug the machine and unblock
chute.
3. Have the impeller replaced by a
qualified service agent.
4. Close, refit or replace collection
bag.
Poor suction,
mulching or
collection
1. Blower chute blocked. 1. Unplug the machine and check for
blockage.
Reduced blower
air flow
15
9. TROUBLESHOOTING
TROUBLE PROBABLE CAUSE REMEDY