Draper BR4/KIT, Инструкция по эксплуатации

Страница: 6 / 8

CARE AND MAINTENANCE
1. When the body repair kit is not in use, the pump unit should be stored with the
release valve open.
2. To check oil level, place the pump unit in
an upright position. As indicated on the
diagram opposite. Remove the dip stick
and the oil level will be indicated.
If required add hydraulic oil until it is
level with the full mark on the stem. YOUR
JACK WAS FILLED AT THE FACTORY
WITH HIGH GRADE HYDRAULIC OIL.
ONLY USE APPROVED OIL.*
3. After extensive use, the oil supply should
be replaced to ensure longer equipment
life. To drain, remove the dip stick and
open release valve. Ensure that no dirt
gets into the system. Refill with approved
jack oil, as paragraph 2.
* We recommend Shell Telus 22.
- 5 -