Section 10 -
Charging Options
This motor has a 5V built in Li-ion battery with integrated charge management. Max power input for recharging: 5V / 2 Amp.
•
Once battery has been depleted, the motor must be charged for 6 hour using the reccomended AC charger.
•
During operation, if voltage drops to less than 4V, the motor will beep 10 times to prompt it needs to be charged.
•
Motor will stop running when the voltage is lower than 2V and it will resume again when the voltage is greater than 2.5V.
Caution:
Ensure cable is kept clear of fabric.
Ensure antenna is kept straight and away from metal objects.
Motor Charging Cable
Acumen Recharge Motor
RF
Antenna
Charging Accessories
USB
Charger
C088.005
12' (4M) Charging Cable - Part#: C107.126
To USB Charger
to Motor
Section 9 -
Tab-Tension Adjustment Procedure
Please Note:
The Draper Tab-Tensioning System is factory-set, and under
normal circumstances will not require field adjustment. If wrinkles are observed,
however, follow the adjustment procedure shown in Figure 9.
Figure 9
PUSH & TURN
CLOCKWISE
to INCREASE TENSION
PUSH & TURN
COUNTER-CLOCKWISE
to RELEASE TENSION
END OF
DOWEL
END OF
DOWEL
CAUTION:
Do not touch or bend surface.
page 8 of 12
Acumen
™
Recharge E & V
Содержание Acumen Recharge E
Страница 11: ...page 11 of 12 Acumen Recharge E V...
