5. HEALTH AND SAFETY INFORMATION
Wait for the machine to stop. Unless the machine is fitted with a safety brake, some parts may
continue to move due to momentum. Wait for all parts to stop, then unplug it from the power supply
before making any adjustments, carrying out maintenance operations or just finishing using the
tool.
Remove and check setting tools. Some machinery requires the use of additional tools or keys to
set, load or adjust the power tool. Before starting the power tool always check to make certain they
have been removed and are safely away from the machine.
Prevent unintentional starting. Before plugging any machine in to the power supply, make sure
the switch is in the OFF position. If the machine is portable, do not hold the machine near the
switch and take care when putting the machine down, that nothing can operate the switch.
Carefully select an extension lead. Some machines are not suitable for use with extension
leads. If the tool is designed for use outdoors, use an extension lead also suitable for that
environment. When using an extended lead, select one capable of handling the current (amps)
drawn by the machine in use. Fully extend the lead regardless of the distance between the power
supply and the tool. Excess current (amps) and a coiled extension lead will both cause the cable to
heat up and can result in fire.
Concentrate and stay alert. Distractions are likely to cause an accident. Never operate a power
tool if you are under the influence of drugs (prescription or otherwise), including alcohol or if you
are feeling tired. Being disorientated will result in an accident.
Have this tool repaired by a qualified person. This tool is designed to conform to the relevant
international and local standards and as such should be maintained and repaired by someone
qualified, using only original parts supplied by the manufacturer. This will ensure the tool remains
safe to use.
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR LAWN AERATOR/
SCARIFIER
Important: Draper Tools Limited recommends that this machine should not be modified or used
for any application other than that for which it was designed. If you are unsure of its relative
applications do not hesitate to contact us in writing and we will advise you.
Training. Read the instructions carefully. Be familiar with the controls and the proper use of the
machine.
Preparation. Never allow people unfamiliar with these instructions or children to use the machine.
Local regulations can restrict the age of the operator.
− Never operate the machine while people, especially children, or pets are nearby.
− Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people or their property.
− Wear ear protection and safety glasses at all times while operating the machine.
− While operating the machine, always wear substantial footwear and long trousers. Do not
operate the machine when barefoot or wearing open sandals.
− Thoroughly inspect the area where the machine is to be used and remove all stones, sticks,
wires and other foreign objects.
− Before using, always visually inspect to see that the tines, bolts are not worn or damaged.
Replace worn or damaged tines and bolts in sets to preserve balance.
Operation. Operate the machine only in daylight or in good artificial light.
− Avoid operating the machine in wet grass or take additional precautions to avoid slipping.
− Always be sure of your footing on slopes.
− Walk, never run.
− Always work across the face of slopes, never up and down.
− Exercise extreme caution when changing direction on slopes.
– 7 –
