manualshive.com logo in svg

Draper 87680, Инструкция по эксплуатации

Поделиться
Скачать
Draper 87680 Скачать руководство пользователя страница 1

INSTRUCTIONS FOR

2.5HP

Petrol Water Pump

 

Stock No.87680    Part No.PWP27

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND 

EFFECTIVE USE OF THIS PRODUCT.

GENERAL INFORMATION

These instructions accompanying the product are the original instructions. This document is part of the product, keep it 
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before 
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and 
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions 
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy 
of continuous improvement determines the right to make modifications without prior warning.

Содержание 87680

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды