Draper 79883 Скачать руководство пользователя страница 4

3. WARRANTY

– 4 –

3.1 WARRANTY

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be 

free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or 

contact:
Draper Tools Limited, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: +44 (0) 8049 4333 or Product Help Line +44 (0) 23 8049 4344.
A proof of purchase 

must be provided with the tool.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship, 

repairs will be carried out free of charge. This warranty period covering parts and labour is  

12 months from the date of purchase except where tools are hired out when the warranty period  

is 90 days from  the date of purchase. This warranty does not apply to any consumable parts, any 

type of battery or normal wear and tear, nor does it cover any damage caused by misuse, careless 

or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other 

than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will 

be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms 

are not authorised.
Your Draper warranty is not effective unless you can produce upon request a dated receipt or 

invoice to verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.

Содержание 79883





















Отзывы: